|
 |
FRP Grating & Structural Systems |
|
SeaSafe FRP Grating & Structural Systems
SeaSafe FRP green grating panels are stocked for immediate shipment in several standard sizes. Panels are available in four resin systems, two top surface configurations, four panel sizes, and five standard grid patterns. Typical applications include floor systems, walkways, work platforms, stairs, ramps, trench covers and catwalks. |
GatorGrate® is a one-piece, reinforced polyester or vinylester (FRP) grating, available in standard panels and sizes. It is manufactured by interweaving continuous, thoroughly wetted, fiberglass strand with thermosetting resin systems. Standard panels are available in four resin systems, two top surface configurations, four panel sizes and five standard grid patterns. Typical applications include floor systems, walkways, work platforms, stairs, ramps, trench covers and catwalks. GatorGrate has been successfully used in many industries - including food processing, beverage, chemical processing, water & wastewater treatment, metal finishing, pulp/paper, transportation, pharmaceutical, textile, oil/gas and mining/smelting/refining. |
|
Standard Resin Systems
Seasafe's standard resin systems meet ASTM E-84 Class 1 flame rating, and include UV inhibitors for applications involving continuous exposure to the sun. Choose from the following standard resin systems. Ask us about creating special resins for unique environments, such as low smoke, low toxicity, or extra low flame applications.
IFR - Made with a premium-grade isophthalic polyester flame-retardant resin system. Standard colors are yellow and gray for pultruded grating. WT grating and one inch I-bar gratings are also available in white.
VFR - Made with a premium-grade vinylester flame-retardant resin system for added protection against corrosion. Standard colors are yellow and gray for pultruded grating.
Standard Top Surfaces
Grit top - Integral, embedded silica sand, to a nominal depth of 3/16"
Meniscus top - Concave, half-moon cross section
Standard Grid Dimensions |
Standard Grid Patterns
GG-SD10 - 1" thick, 1" x 4", rectangular grid, standard duty. Bearing bars 0.250" thick; Cross bars 0.500" thick; Open area of 65%
GG-HD10 - 1" thick, 1" x 4", rectangular grid, heavy duty. Bearing bars 0.3125" thick; Cross bars 0.5625" thick; Open area of 60%
GG-1510 - 1" thick, 1-1/2" x 1-1/2", square grid.; Bearing bars 0.2350" thick; Cross bars 0.2350" thick; Open area of 70%
GG-1515 - 1-1/2" thick, 1-1/2" x 1-1/2",square grid. Bearing bars 0.250" thick; Cross bars 0.250" thick; Open area of 70%
GG-2020 - 2" thick, 2" x 2", square grid. Bearing bars 0.3125" thick; Cross bars 0.3125" thick; Open area of 72%
|
|
|
|
|
|
