|
|
Seal/less Magnet Drive Pumps
|
|
|
Kontro
Seal/less mag drive horizontal ANSI, API, self-primer, & hi-temp centrifugal designs to 4000 GPM, 700' head & 750 F. Fischer Process Industries represents Kontro in Southern Ohio, Kentucky, and Southern Indiana as well as serving as a North American Kontro Stocking Center, with complete pumps & parts immediately available from our Cincinnati warehouse.
1. Size and Select a Kontro Pump
2. Check Kontro Availability
3. Call 800.543.7000 to purchase by phone, or order on-line (to receive a User ID and Password contact Bob Hellmann at 800.543.7000)
|
|
|
|
Roth Pump Company
Roth offers seal less magnetically driven pumps, which require an NPSHr of only 1 ft. (0.30m) FULL CURVE. These pumps can produce any level of differential pressure to 1500 ft (450m) ( this pressure is 900ft (225m) greater than centrifugal pumps ) and capacities from 4 to 180 GPM (0.91 to 35m3/hr). Construction includes non-magnetic stainless steel or Hastalloy C parts for improved corrosion resistance and improved performance by reducing eddy currents. All bearing surfaces are provided with grooves to provide constant lubrication. High discharge pressure provides sufficient margin above vapor pressure to insure the fluid being pumped stays in its liquid phase as it passes through the magnetic drive. If you have environmental concerns, consider this pump.
|
|
|
|
NIKKISO Pumps America
Canned Motor Pump Models are single stage, sealless, centrifugal pumps available in either horizontal or vertical configurations. Unique to this design is the fact that the three-phase electric motor is integral to the pump. The pumped liquid lubricates the single shaft's bearings while efficiently cooling the motor. A thin metallic liner or "can" (standard material is hastelloy) protects the motor's rotor and stator windings from direct contact with the pumped fluid. The canned motor pump's operating principle is significantly enhanced by the fact that no rotating shaft penetrates a pump housing, like with typical "motor coupled" configurations. The result is a design inherently capable of "dual containment", i.e. primary at the stator liner and redundant protection at the outer stator band/terminal lug plate.
|
|
|
 |
Magnatex
Magnatex ® Pumps are state of the art, heavy-duty, sealless, centrifugal, magnetic drive pumps, available in stainless steel, alloy, polypropylene or fluoropolymer-lined construction. Magnatex® pumps are successfully operating in tens of thousands of applications worldwide, meeting tough pumping challenges for both low and high temperature liquids, from recovery solvents to heat transfer fluids, acids, bases, toxic, noxious and high purity fluids.
Fischer Process South represents Magnatex in Georgia and Tennessee.
|
|
|
|
Endura AB
Liquiflo's Endura ® AB is our Patented Air-Barrier Centrifugal Pump. The AB, (air-barrier) combines the best features of a standard sealed pump with that of a mag-drive pump, while eliminating the drawbacks commonly associated with these designs. This runs dry indefinitely - making the Endura ® AB unlike any other pump in the industry.
|
|
|
Iwaki MX Series
New High Efficiency, Dry Run, Front & Rear shaft supported design, sealless mag-drive non-metallic pumps. MX Series pumps are highly recommended for use in various production processes such as filtering, spraying, washing and etching in surface treatment processes.
|
|
|
|
Iwaki MDM ANSI Pumps
MDM is a wide ranging line of chemical process pumps designed to solve the most demanding chemical handling applications. Two materials of construction and convenient mounting configurations allow MDM to handle many aggressive chemical and high purity applications.
Unexpected dry running won't damage the pump or interrupt the process. Our new design allows the pump to handle these situations with ease. High purity process fluid will not be contaminated by trace metals due to our combination of high purity materials and meticulous construction.
High strength rare earth magnets are totally encapsulated within fluororesin moldings. Small, lightweight and perfectly concentric magnet capsules optimize pump efficiency. An expanded temperature range (up to 300°F) as well as increased solids handling capabilities (up to 10%) provides users with solutions for their difficult applications.
|
|
|
|
|
|
|
